Hyundai Veloster Owners Manual
Manual heating and air conditioningFeatures of your vehicle / Automatic climate control system / Manual heating and air conditioning
The heating and cooling system can be controlled manually by pressing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of buttons or knob(s) selected.
1. Start the engine.
2. Set the mode to the desired position. For improving the effectiveness of heating
and cooling;
- Heating:
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Refer to the illustration in the “Manual climate control system”.
Face-Level
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Bi-Level
Air flow is directed towards the face and the floor.
Floor-Level
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Floor & Defrost
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Defrost-Level
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel.
Also, you can adjust the direction of air delivered from these vents using the vent control lever as shown.
Temperature control
The temperature will increase by pushing the up button. Each push of the button will cause the temperature to increase by 1°F/0.5°C.
The temperature will decrease by pushing the down button. Each push of the button will cause the temperature to decrease by 1°F/0.5°C. When set to the lowest temperature setting, the air conditioning will operate continuously.
Temperature conversion
This allows you to set the unit of the distance and the temperature to the celsius and the fahrenheit on your navigation system.
- Units: Change the unit between the “km” and “mls”.
- Temperature: Change the temperature between the “C” and “F”.
Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Recirculated air position
The indicator light on the button illuminates when the recirculated air position is selected.
With the recirculated air position selected, air from passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Outside (fresh) air position
The indicator light on the button does not illuminate when the outside (fresh) air position is selected.
With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.
✽ NOTICE
Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.
In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.
WARNING
- • Continued use of the climate control system operation in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
- • Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
- • Continued use of the climate control system operation in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.
Fan speed control
The fan speed can be set to the desired speed by turning the fan speed control
switch. To change the fan speed, press (
)
)
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light will illuminate).
Press the button again to turn the air conditioning system off.
OFF mode
Push the OFF button to turn off the air climate control system. However you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position.
✽ NOTICE
If you push the “CLIMATE” button, the climate information will be displayed on screen.
